Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in San Fernando, CA
Gate access control in San Fernando means something different than it does in newer Valley suburbs. Most homes here were built between the 1940s and 1970s, and the wrought iron gates hung on those properties in the 70s and 80s are still there: 40 to 50 years old, heat-cycled through every triple-digit summer, and wired for keypads and intercoms nobody ever updated. When a keypad goes dead or a gate won’t respond to a remote, we’re usually working on hardware that predates the internet age. Call us at (805) 210-8672 and a live person will answer, day or night.
Why San Fernando Homes Are Different
San Fernando is a dense 2.5-square-mile city sitting deep in the Valley, where afternoons above 100°F are normal from July through September. That heat does more than make the hardware hot to the touch. Steel gate frames expand and contract daily, and over 40 years, that thermal cycling loosens set screws, hinge bolts, and weld joints in ways you won’t see in coastal communities. Seasonal Santa Ana winds through the pass can exceed 50 mph, slamming unsecured gates and bending frames already fatigued by decades of that cycling.
The housing stock compounds the problem. Post-WWII bungalows and ranch homes often have converted garages and added ADUs that altered original driveway layouts. Gate technicians here routinely find non-standard openings, posts relocated with patched concrete footings, and ironwork hung in configurations that were improvised rather than engineered. There’s another San Fernando factor we see on service calls: the city sits close to the 1971 Sylmar rupture zone and absorbed heavy shaking in the 1994 Northridge quake. Gate posts whose concrete footing bases cracked in one of those events were often surface-patched and left to shift, so a gate that drags or won’t latch square looks like a hinge problem but is actually a footing problem under the post.
Our Main San Fernando Services
Two calls dominate our San Fernando work. Gate access control and gate parts and welding, with the first usually arriving as a keypad or remote failure on old hardware and the second as a gate that physically doesn’t move or close anymore. The three services below each have their own detailed San Fernando pages.
Gate Repair in San Fernando
Most Gate Repair in San Fernando calls start with a gate that drags, sags, or won’t latch. On 1970s and 80s wrought iron in this city, that is frequently a post footing that shifted years ago rather than a hinge that failed yesterday. We trace the actual cause, document it, and price the fix in writing before any tool comes off the truck.
Gate Installation in San Fernando
New Gate Installation in San Fernando work has to account for the non-standard openings and altered driveway layouts common on this city’s post-WWII lots. We measure the actual opening, check the existing posts or plan new footing depth for the soil here, and give a written line-item price before ordering anything. No same-day promises on installs, just a measured scope and a schedule.
Gate Motor & Opener in San Fernando
When a Gate Motor & Opener in San Fernando fails, the heat is usually a factor. Years of 100°F expansion cycles stress limit switches, capacitor circuits, and arm brackets on swing operators. We service LiftMaster, FAAC, BFT, and Linear units among nine brands, and we can usually keep the existing motor running rather than replacing it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in San Fernando
Gate access control in San Fernando usually means adapting modern entry hardware to gate frames and posts installed 40 or more years ago. The keypads and intercoms from that era are now failing from heat and wiring fatigue, and older remotes aren’t supported anymore. Our Gate Access Control work covers keypads, remotes, phone entry, card readers, and video intercoms, and every job ends with documented photos of every adjustment and a written record of the part numbers installed.
Keypad Entry
Signs you need it
The keypad works only when pressed hard, needs repeated codes, or shows dead buttons after hot afternoons.
What it costs in San Fernando
Replacing a gate keypad in San Fernando typically runs $180 to $380, and a full keypad plus controller install lands between $450 and $850 depending on wire condition.
How we do it
We test voltage at the existing keypad, check the wire run for heat damage, install the new unit, program the code, and photograph the finished connections and settings.
Remote Control
Signs you need it
The gate opens only from a few feet away, one remote works and another doesn’t, or a new car’s HomeLink won’t pair.
What it costs in San Fernando
Adding or replacing a gate remote in San Fernando runs $80 to $250 per remote including programming, and receiver replacement if needed adds $180 to $300.
How we do it
We identify the receiver frequency and protocol, program the new remote to the existing board, range-test it from the street, and hand you a photo log of everything set.
Video Intercom
Signs you need it
The old intercom handset crackles, the screen won’t show a visitor, or the gate release button no longer triggers the opener.
What it costs in San Fernando
A video intercom replacement in San Fernando ranges from $500 to $1,500 depending on wiring, and camera-only upgrades run $200 to $600.
How we do it
We check whether the old wire run supports video, mount the replacement unit at the gate or entry, configure the indoor monitor, and photograph the final wiring.
What Gate Access Control Costs in San Fernando
| Item | Typical range in San Fernando |
|---|---|
| Keypad replacement | $180 - $380 |
| Remote add or replace | $80 - $250 |
| Video intercom replacement | $500 - $1,500 |
Can you work with the old wiring in my San Fernando gate?
Almost always, yes. Most 1970s and 80s gate wiring is low-voltage and still usable; we test it before recommending any replacement. Call (805) 210-8672 and we’ll tell you what’s actually there.
Do you program access codes on the same day?
Yes, keypad and remote programming happens during the initial visit. The flat price is written and agreed before we touch anything, and you get a photo record of the settings before we leave.
Gate Parts & Welding in San Fernando
Gate parts and welding in San Fernando is as much about the post as the gate. The 1971 and 1994 earthquakes cracked footing bases across this city, and 40 years of 100°F expansion cycles have loosened the ironwork above them. Our Gate Parts & Welding work covers hinge replacement, post replacement, rail repair, custom welding, and gate rollers, always with a written price before the work starts.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, scrapes the driveway, or squeals when swung.
What it costs in San Fernando
Replacing a set of gate hinges in San Fernando typically runs $150 to $350 per pair, with heavy custom hinges landing between $250 and $500 installed.
How we do it
We measure the existing hinge spacing, cut or unbolt the old hardware, weld or bolt on the new pair, and photograph the final alignment with the gate closed.
Post Replacement
Signs you need it
The gate post leans, the gate won’t latch square, or fresh cracks show around the post base after rain.
What it costs in San Fernando
Gate post replacement in San Fernando runs $300 to $700 for excavation, new steel, and concrete, with the upper end reflecting deep footings needed for quake-shifted soil.
How we do it
We expose the old footing, check whether the base shifted in past quakes, set a new post in properly mixed concrete, and document the pour depth before closing it up.
Custom Welding
Signs you need it
A broken hinge plate, cracked ironwork at a stress point, or a frame bent by a Santa Ana wind slam.
What it costs in San Fernando
Custom welding repairs in San Fernando range from $120 for a small bracket to $600 or more for structural frame repairs, priced after we see the break.
How we do it
We clean the area to bare metal, weld with a process matched to the iron thickness, grind the finish clean, and photograph the repair before and after paint.
What Gate Parts & Welding Costs in San Fernando
| Item | Typical range in San Fernando |
|---|---|
| Hinge replacement | $150 - $350 |
| Post replacement | $300 - $700 |
| Custom welding repair | $120 - $600 |
Can you weld my gate without removing it?
Often yes, for hinge and bracket repairs we weld in place. For structural breaks or post failures the gate may need to come down to work safely. We’ll tell you after we see it, and the price is written before we start.
Do you replace just the damaged section of ironwork?
Yes, we fabricate and weld replacement sections to match the existing rail and picket profile. Call (805) 210-8672 for a written quote, which is free and has no obligation.
Brands We Service in San Fernando
We service nine gate-automation brands, including LiftMaster, FAAC, BFT, and Linear. Parts for the most common San Fernando units are stocked locally, so most opener and access-control repairs finish same-day without waiting on freight. See our brands for the full list. One company for whatever motor is already on the property.
Pricing for Gate Repair in San Fernando, CA
| Service | Typical range in San Fernando |
|---|---|
| Keypad replacement | $180 - $380 |
| Gate remote add or replace | $80 - $250 |
| Video intercom replacement | $500 - $1,500 |
| Hinge replacement | $150 - $350 |
| Post replacement | $300 - $700 |
| Custom welding repair | $120 - $600 |
Prices in San Fernando push toward the upper end when a post footing has shifted from earthquake damage and needs re-setting, or when 40-year-old wiring has to be replaced alongside the hardware. The flat price is written and handed over before any work starts, under Clause 1 of the Haven Standard.
Neighborhoods We Serve in San Fernando
Our crews serve all of San Fernando, usually arriving within about 60 to 90 minutes for repair calls. Access-control and welding jobs are scheduled with a written quote first.
- Downtown San Fernando
- Pacoima corridor
- Truman Street area
- Glenoaks Boulevard corridor
- Maclay Avenue district
Service Area - Cities Near San Fernando
We also dispatch from our Los Angeles office to Van Nuys, CA, Reseda, CA, North Hollywood, CA, and Chatsworth, CA. The same written-price rule applies on every job in every city, no exceptions.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Fernando
For repair calls, we typically arrive within 60 to 90 minutes across San Fernando. Call (805) 210-8672 and a live person will answer, day or night. Install and welding jobs are scheduled with a written quote first.
Repairs to an existing gate, hinges, posts, or access hardware generally don’t require a building permit in San Fernando. A full installation with new footings may, and we’ll flag that during the quote. We’ll tell you plainly before any work starts.
The written quote includes parts, labor, and any concrete or hardware needed, line-itemed in dollars. Nothing gets added after the fact unless you approve a written change order. That’s Haven Standard Clause 1 and it applies on every San Fernando job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Fernando Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.