Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Reseda, CA
Gate access control in Reseda means retrofitting 1950s and 1960s ranch homes whose original intercoms and keypads were never built for the way people live now. These are concrete block walls and tubular steel gates on flat lots that bake in 100°F+ summer heat, where cheap circuit boards fail and keypad membranes crack within a few seasons. We work on Gate Access Control and Gate Parts & Welding jobs across Reseda, and we quote a written price before any tool comes off the truck. Call (805) 210-8672 when you want the number first.
Why Reseda Homes Are Different
The 1994 Northridge earthquake’s epicenter sat directly beneath Reseda, near Reseda Boulevard and Arminta Street. Block walls, gate pilasters, and post footings took the worst of it. What got rebuilt in the mid-to-late 1990s is now approaching 30 years old, and the original gates that survived are pushing 50. That means a community-wide replacement cycle is hitting Reseda all at once: post footings have shifted, weld points are fatigued, and gate frames that have never been re-squared are dragging on their hinges.
Then there’s the heat. Reseda sits on the flat Valley floor where summer afternoons hit 105°F routinely. On a day like that, the first diagnostic step on a dead automatic gate should be the motor’s thermal cutout reset, not the circuit board. Operators overheat here in a way they don’t in Burbank or Thousand Oaks. Add in the severe daily expansion-contraction cycles on steel and iron, and you get rust at weld joints, hairline cracks at hinge plates, and keypads whose adhesive backs have turned to crumbs.
Our Main Reseda Services
These are the three calls we take most often from Reseda homeowners, and each one has a page of its own with full detail on pricing and process.
Gate Repair in Reseda
Most Reseda repairs are either a gate that won’t close, a hinge that’s sagging, or a wheel that’s ground flat on the concrete track. On post-1994 rebuilds we often find the gate post was set in a hurry and has since moved a half-inch out of plumb. On pre-quake gates we find rust at the bottom rail and hinge welds that are ready to let go. We document what we find, photograph it, and hand you a written price before anything gets cut or replaced. Full details are on the Gate Repair in Reseda page.
Gate Installation in Reseda
New gates in Reseda almost always go on existing concrete block walls and existing driveway approaches, so the job is about measurement, core-drilling, and making the new frame match a wall that may not be perfectly plumb after 30 or 50 years. We replace the post footings when needed rather than bolting a new gate to a moving post. A free measure and a written price are part of every quote. Everything Reseda-specific is on the Gate Installation in Reseda page.
Gate Motor & Opener in Reseda
Valley heat kills gate operators. The thermal protection in many swing and slide motors triggers at ambient temperatures that Reseda hits every August, which is why so many gates here stop working at 2 PM and work again at 8 PM. We diagnose the difference between thermal cutout, a worn capacitor, and a failed limit switch before recommending anything. Same-day motor service is available when the motor is the problem. See the Gate Motor & Opener in Reseda page for full scope and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Reseda
Gate access control in Reseda means keypads, phone entry, card readers, and intercoms installed on sun-blasted walls and posts that see extreme temperature swings every single day. The electronics fail faster here than in coastal LA, and the most common call is a keypad or phone entry system that works intermittently or not at all after a heat wave. We service nine automation brands and document every setting we change, so the next technician doesn’t have to rediscover the wiring. The hub page for this work is Gate Access Control, and it covers all service areas we work in.
Keypad Entry
Signs you need it
Buttons that need three hard presses, a code that works only in the morning, or a keypad face that’s cracked and yellowed from Valley sun.
What it costs in Reseda
Keypad replacement or new installation in Reseda typically runs $75-$200 depending on the brand and whether we’re reusing existing wiring.
How we do it
We pull the old keypad, check the low-voltage wiring at the operator, install the new unit, program the code in front of you, and photograph the finished job.
Phone Entry
Signs you need it
Calls from the gate don’t ring your phone, callers can’t hear you, or the system works only when someone is standing within ten feet of the box.
What it costs in Reseda
Phone entry systems in Reseda usually fall between $250 and $800 depending on whether it’s a cellular unit or a landline replacement.
How we do it
We test the phone line or cellular signal at the gate, replace or reconfigure the entry unit, connect it to the operator, and leave a written record of every setting.
What Gate Access Control Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Keypad entry | $75-$200 |
| Phone entry | $250-$800 |
| Video intercom | $300-$900 |
Can you replace just the keypad on my Reseda gate?
Yes. We replace the keypad alone when the wiring and operator are still sound, which is about 70% of Reseda keypad calls. The new keypad gets programmed and tested in front of you. Call (805) 210-8672 for a written quote.
Will a phone entry system work without a landline in Reseda?
Yes. Cellular phone entry systems need no landline at all and work on a SIM card like a mobile phone. They hold up better than Wi-Fi units in Reseda’s heat. We quote the cellular option as a standard part of the estimate.
Gate Parts & Welding in Reseda
Post-quake gates in Reseda are now old enough that the steel itself is failing: hinge welds crack from 30 years of daily expansion and contraction, bottom rails rust through from sprinkler overspray, and posts get knocked out of plumb when a tired operator drags the gate instead of driving it. We weld, replace, and rebuild in place rather than selling a whole new gate unless the frame is genuinely gone. The hub page for this work is Gate Parts & Welding, with full scope details.
Hinge Replacement
Signs you need it
The gate scrapes the ground, sags visibly at the latch side, or the hinge pin has worn to half its original diameter.
What it costs in Reseda
Hinge replacement on a Reseda tubular steel or wrought iron gate generally runs $100-$350 for a pair including grinding off the old welds.
How we do it
We support the gate, cut or unbolt the old hinges, weld or bolt new ones in place, and set the gate back to level before we photograph the work.
Post Replacement
Signs you need it
The post is out of plumb by more than a half-inch, the concrete around it is cracked in a circle, or the gate won’t stay latched no matter how many times the hinges are adjusted.
What it costs in Reseda
Post replacement in Reseda ranges from $250 to $800 depending on whether the footing has to be re-poured and the wall repaired.
How we do it
We cut out the old post, core-drill or dig a new footing, set the new post in concrete, and leave it braced with a written note on cure time before any gate is re-hung.
What Gate Parts & Welding Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Hinge replacement | $100-$350 |
| Post replacement | $250-$800 |
| Custom welding | $150-$450 |
Can you weld an existing wrought iron gate in Reseda rather than replace it?
Yes, in most cases. We repair cracked welds, re-weld broken pickets, and reinforce rust-thinned bottom rails as long as the frame is structurally sound. The written quote tells you when a repair stops making sense. Call (805) 210-8672.
Do you replace gate posts that shifted in the 1994 earthquake?
Yes. Shifted post footings are the most common structural problem we see on 30-year-old Reseda gates. We re-pour the footing, re-set the post, and re-hang the gate at the correct height and swing.
Brands We Service in Reseda
We carry parts and service automation for LiftMaster, FAAC, and Elite on most Reseda trucks, which means keypad and control board swaps usually happen same-day or next-day. We also work on Mighty Mule operators. Visit our brands page for the full list of what we stock and service.
Pricing for Gate Repair in Reseda, CA
| Service | Typical range in Reseda |
|---|---|
| Keypad entry | $75-$200 |
| Remote control setup | $85-$225 |
| Phone entry | $250-$800 |
| Card reader | $150-$500 |
| Video intercom | $300-$900 |
| Hinge replacement | $100-$350 |
| Post replacement | $250-$800 |
| Rail repair | $150-$500 |
| Custom welding | $150-$450 |
| Gate rollers | $120-$400 |
What pushes price higher in Reseda is almost always access: a post footer that has to be dug out of 30-year-old concrete, a gate that’s been welded repeatedly by a succession of previous repairs, or wiring that has to be re-run through a block wall. The quote you get before work starts is the price you pay unless we find something structural we couldn’t see and we stop to get your sign-off in writing.
Neighborhoods We Serve in Reseda
We work throughout Reseda, from the blocks around Reseda Park and Cleveland High School west to Tampa Avenue and from Sherman Way north to the railroad right-of-way. Most jobs within Reseda get a same-day or next-day visit depending on the work.
- Reseda Ranch
- North Reseda
- Lake Balboa border
- Reseda south of Sherman Way
- West Reseda near Tampa
Service Area - Cities Near Reseda
When Reseda homeowners ask whether we cover the rest of the Valley, the answer is yes. We take calls from Tarzana, CA and Encino, CA to the south, Canoga Park, CA to the west, and Chatsworth, CA to the northwest. Dispatch is coordinated from our Los Angeles office, with crews running local routes through Reseda daily.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Reseda
Most non-emergency Reseda calls get a same-day or next-day visit. Emergency calls, like a gate stuck open or a vehicle trapped in a driveway, get priority dispatch. Call (805) 210-8672 and a person answers. We don’t route you to voicemail.
Repairs and like-for-like replacements on existing gate posts don’t require a permit. A full new gate with new footings on a Reseda property may need a simple building permit, and we can tell you during the measure. Homeowners with HOAs should check their architectural guidelines.
We give ballpark numbers over the phone based on what you describe, which works for something like a keypad or hinge. For anything structural or electrical, we come out, diagnose for free, and hand you a written flat price before any work starts. That’s the Haven Standard, and it means no surprise invoice at the end.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reseda Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.