Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across San Fernando
Most gate problems in San Fernando look simple on the surface, but the real issue is often buried under the concrete. A gate that drags, won’t latch, or sags at the hinge usually traces back to one of two things here: a cracked post footing from the 1971 Sylmar or 1994 Northridge earthquakes, or 40-plus-year-old ironwork that’s been expanding and contracting through 100°F summers since the Carter administration. Our technicians see both every week. We serve the entire 2.5-square-mile city, from the streets around San Fernando Mall to the quiet bungalow blocks north of Maclay Avenue. Call (805) 210-8672 and a live person answers, day or night.
When we roll up to a gate in San Fernando, we’re not just looking at the hinge. We’re checking what’s under the post, what the concrete footing has been through, and whether the original 1970s installation was ever meant to carry the weight it’s carrying now.
Why Vance Gate Repair Canoga Park Is San Fernando’s Preferred Gate Repair Company
Our crews work San Fernando weekly, and we’ve learned this city’s gates the hard way: by opening them up and documenting what we find. Adrian Vance started this company in 2014 after years on commercial access-control sites, and that habit of writing everything down carried over. Every San Fernando job, from a rusted bottom hinge on a 1970s wrought iron walk gate to a full sliding-gate operator rebuild on a shared driveway, leaves with a written price before any tool comes out, and a photographed record of every adjustment when we’re done.
San Fernando homeowners tend to do their homework before they call. They’ve read the reviews, they’ve seen what a bad repair looks like, and they want the price on paper before they commit. That’s exactly how we operate. Under Haven Standard Clause 1, the flat price is written and handed to you before work starts. Under Clause 4, you get a photo log of what was found, what was set, and what was installed at no extra charge. And the 365-Day Done Right Promise means if the repair isn’t right within a full year, we make it right. No argument, no fee.
We dispatch background-checked, uniformed technicians to San Fernando with name and photo sent before arrival, so you know exactly who’s walking up your driveway. And when you call at 2 a.m. because a wind gust just slammed your gate off its track, a live person picks up, not a voicemail loop.
Our Gate Repair Services in San Fernando
We don’t do one-size-fits-all gate work. The services below are the ones San Fernando calls us for most, and each one gets the same treatment: written scope, written price, documented result.
Electric Gate Repair
Most San Fernando Gate Motor & Opener systems run on operators that are 15 to 25 years old, bolted to posts that may or may not be plumb anymore. We service all nine major automation brands, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we work on whatever’s already bolted to your property rather than steering you toward a replacement you don’t need. If your gate opens halfway and reverses, or hums but won’t move, we’ll find out whether it’s a limit switch, a capacitor, a board, or a mechanical bind.
Automatic Gate Repair
Around the converted garages and narrow driveways off Brand Boulevard and San Fernando Road, we see a lot of automatic gates that were installed on improvised openings. When the operator was added to a 1970s swing gate that was never designed for automation, the added weight and torque accelerate wear on every component. We repair the operator, but we also correct the underlying geometry so the motor isn’t fighting the gate every cycle.
Hinge & Post Repair
This is the work San Fernando needs most, and it’s the work that separates a real repair from a band-aid. A sagging gate on a post-WWII bungalow is rarely just a worn hinge pin. It’s often a post footing that cracked in the Sylmar quake, got surface-patched by a previous owner, and has been slowly shifting ever since. We remove the post, chip out the old footing, pour a new reinforced base, and remount the gate so it clears the driveway and latches square.
Gate Realignment
Sliding gates on shared driveways and narrow side yards are common in San Fernando because a swing gate won’t fit. When those gates go out of alignment, the rack binds, the operator strains, and the whole thing makes a noise that wakes the neighbors. We reset the track, realign the rack, and set the travel limits so the gate opens fully without slamming the stops.
BeforeAfterTrusted Brands We Service in San Fernando
We don’t have a favorite brand, and that’s the point. We work on LiftMaster, FAAC, BFT, and Linear systems daily, plus five other major automation brands, because San Fernando has a mix of whatever was installed over the past four decades. The homeowner who bought a LiftMaster sliding operator in 2008 shouldn’t have to replace it just because their current gate company only stocks one brand’s parts. We keep common boards, capacitors, remotes, and safety sensors stocked on our trucks, so most San Fernando calls are resolved in a single visit.
Common Gate Repair Problems We See in San Fernando Homes
- Earthquake-cracked post footings. San Fernando sits almost directly over the 1971 Sylmar rupture zone and took heavy shaking again in 1994. We routinely find footings that cracked in one of those events, were surface-patched, and have since let the post drift enough that the gate drags or refuses to latch.
- Thermal-cycle hinge sag. Daily temperature swings from the inland valley heat, regularly exceeding 100°F in summer, expand and contract steel gate frames and hardware. After 40 or 50 years, hinge bolts and set screws loosen until the gate drops at the latch side.
- Santa Ana wind damage on sliding gates. When gusts over 50 mph funnel through the valley, an unsecured sliding gate becomes a sail. We’ve seen bent racks, stripped drive gears, and operators shoved clean off their mounts.
- Non-standard openings from ADU conversions. Many San Fernando bungalows had driveways altered when garages became living space or ADUs went in. The gate that was improvised to fit that new narrower opening often wasn’t engineered for it, and the hardware fails early because it’s fighting geometry.
Pricing for Gate Repair in San Fernando, CA
We price in writing because you should know what a repair costs before you approve it. Here’s what typical San Fernando gate work runs:
| Service | Typical Range |
|---|---|
| Hinge replacement and gate re-hang | $180-$320 |
| Gate realignment (sliding or swing) | $150-$350 |
| Post footing repair with new concrete base | $400-$800 |
| Operator board or limit switch replacement | $250-$550 |
| Weld and rust repair on wrought iron | $200-$450 |
| Full operator replacement (parts and labor) | $900-$2,400 |
The spread depends on the brand, the condition of what’s already there, and whether we’re working on a standard opening or an improvised one. What doesn’t change: the price is written and agreed before any work starts. You never get a surprise invoice at the end. Call (805) 210-8672 for a free estimate.
We Also Serve Cities Near San Fernando
In addition to our work across Gate Repair in San Fernando, our crews serve Van Nuys, Reseda, North Hollywood, and Chatsworth. Dispatch and scheduling are coordinated from our Los Angeles office, with local crews serving each area.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in San Fernando
Check the gap between the gate post and the surrounding concrete. If you see a hairline crack running through the concrete base, or if the post leans even slightly toward the gate, that’s a footing problem, not a hinge problem. Hinge wear sags the gate at the latch side while the post stays plumb; a cracked footing lets the whole post tip. We confirm this in person and photograph the evidence before recommending any repair. Call (805) 210-8672 for a free assessment.
Usually, yes. We realign the rack, replace bent sections if needed, reset the track wheels, and check the operator’s internal gears and limit switches. Most wind-damaged sliding gates are repairable for far less than a full operator replacement. We’ll show you the written price before we start.
Yes. We repair and re-hang gates to fit whatever opening is actually there, including narrow side-yard openings and improvised widths from ADU conversions. We don’t force a stock solution onto a non-stock opening. The work is quoted in writing after we measure.
California law requires automatic gates to have reversing safety devices, typically photo-eyes, also called the infrared beam that stops the gate if anything crosses the path, plus edge sensors on newer installations. A photo-eye that’s misaligned by two inches will fail to detect an obstruction. We test every safety device on every automatic gate service call and photograph the test results for your record.
Yes. We cut out the rusted section at the hinge, weld in fresh steel, grind it smooth, and repaint to match as closely as possible. If the hinge post itself is rusted through or sitting in a cracked footing, we address that too. You get a written price for the full scope before we begin.
If your gate is dragging, sagging, or stuck in San Fernando, call (805) 210-8672 now. A live person answers, the estimate is free, and the price you approve in writing is the price you pay. San Fernando gates are different because the ground under them has been through two major earthquakes and decades of extreme heat. We repair them accordingly.
Written by Adrian Vance, Owner at Vance Gate Repair Canoga Park, serving San Fernando and surrounding communities since 2014.