Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Hollywood
Gate installation in North Hollywood runs between $1,800 and $6,500 for most residential projects, with sliding gates and double gate setups at the higher end. Most installs we book take one to two days on site, and we hand you a written price before any work starts. If you’re dealing with a sagging gate on Vineland Avenue, a retrofit post that’s pulling out of a 1960s driveway, or a shared driveway off Burbank Boulevard, call us at (805) 210-8672 and we’ll schedule a walkthrough.
North Hollywood’s gate problems aren’t the same as Studio City’s or Sherman Oaks’. The housing stock here is older, the driveways are tighter, and the Valley heat punishes cheap hardware. We plan around that reality from the first measurement, not the last invoice.
Why Vance Gate Repair Canoga Park Is North Hollywood’s Preferred Gate Installation Company
We’ve installed and repaired gates across North Hollywood long enough to know the difference between a Magnolia Boulevard bungalow with a narrow side yard and a 1980s apartment complex on Lankershim with a retrofit sliding gate. The jobs are different. The footings are different. The access story, where the tenant’s car has to get out while we’re mid-install, is different too.
Our customers in North Hollywood consistently mention three things: the written price arrives before the work does, the technician leaves a photo log of what was set and what was replaced, and the gate still works months later. That’s the standard Adrian Vance built into the company when he started it in 2014 after years of commercial access control work. Every job, including a small pedestrian gate install, leaves with a documented record under Clause 4 of our Haven Standard.
Dispatch to North Hollywood is handled from our Los Angeles office, and crews are familiar with the neighborhood’s side streets and alley access points. Call (805) 210-8672 and a live person answers, any hour. You won’t get routed through a call center or asked to leave a message.
Our Gate Installation Services in North Hollywood
We install Gate Installation systems of every type common to North Hollywood, and we stock or source the hardware that matches what’s already on the property. The four services below cover most of what we install here.
Driveway Gate Installation
A new driveway gate in North Hollywood usually means a steel or aluminum swing gate on a single-family lot, or a sliding gate where the driveway is too short for a swing leaf to clear a car. We measure the actual slope, check the driveway edge against the property line, and set the post depth based on what we find underground, not what a catalog assumes. The written scope includes the footing spec, the operator load rating, and the safety sensor placement.
Pedestrian Gate Installation
Pedestrian gates in North Hollywood often serve two-story apartment buildings along streets like Oxnard and Cumpston, where security and code compliance are the real drivers. We install steel pedestrian gates with keypad or intercom access, and we add the photo-eye sensors that California law requires on any automated access point. The frame gets welded or bolted based on what the existing masonry can actually carry.
Sliding Gate Installation
Sliding gates are the dominant style on North Hollywood’s apartment and light-commercial properties because they don’t swing into the street or the building. But a sliding gate on a dusty Valley property demands better track specification than a coastal install would. We specify sealed-bearing rollers and hardened steel track on any slide gate we install here, because Santa Ana dust chews through nylon components fast. On shared driveways off Vineland Avenue, a sliding gate is often the only legal option.
Swing Gate Installation
A swing gate install in North Hollywood starts with the hinge post, not the gate panel. The 1940s-to-1960s driveways and block walls here shift enough that a standard post setting becomes a lean problem within a few seasons. We go deeper on the footing embedment, use through-bolts into sound masonry where it’s available, and set the leaf alignment so the operator isn’t fighting the gate from day one. Double swing gates are an option when the driveway is wide, but we’ll tell you plainly if a slide gate makes more sense for the footprint.
Double Gate Installation
Double gates appear most often on wider apartment driveways and side-by-side duplex driveways in North Hollywood. The bigger issue with a double gate here isn’t framing; it’s keeping two leaves from sagging unevenly as the posts settle into older infill. We match operator pairs, set limit switches independently on each leaf, and photograph the final positions so any future maintenance starts from a known reference, not a guess.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
Some North Hollywood properties still run LiftMaster operators, because they’re common and easy to source. Others carry FAAC, BFT, or Linear, depending on when the gate went in and who installed it. We work on all of them. We don’t push a replacement just to sell a new motor; the motor on the existing gate is usually the easiest part of the job to match or swap. If the existing operator is a LiftMaster and the new install needs a different geometry, we’ll say so and show you the load calculation in writing. Our parts inventory for the Los Angeles area lets us pull common LiftMaster and FAAC replacement components quickly, so a North Hollywood install doesn’t stall while a part ships across the country.
Common Gate Installation Problems We See in North Hollywood Homes
- Hinge posts pulling out of 1960s block walls. A gate leaf that drags or binds at the latch is often a post that has lost its bond to the original masonry. The fix starts with a new footing, not a new panel. We’ve pulled posts off North Hollywood driveways where the original installation sat on less than 12 inches of concrete.
- Slide gate rollers ground down by Santa Ana dust. The dry season sends fine grit into every exposed bearing and drive wheel. Nylon parts fail first, and the gate starts jumping the rack. We spec sealed bearings and hardened wheels on new slide gate installs in this neighborhood for exactly this reason.
- Legacy apartment gates with no photo-eye sensors. We regularly see 1980s and early 1990s operators on North Hollywood apartment buildings that were installed before entrapment sensors became mandatory. It isn’t a matter of preference; it’s a code item. Any new operator we install includes the required safety eyes and edge sensors, and we’ll note the upgrade in the written scope.
- Shared driveway gates where both tenants need access during the work. A gate on a shared right of way off Vineland or Lankershim can’t be down for two days. We stage the install so the pedestrian path stays usable, and we plan the heavy work around when the cars are gone. That’s the difference between a gate company and a company that understands how North Hollywood’s denser lots actually work.
Pricing for Gate Installation in North Hollywood, CA
A single pedestrian gate in North Hollywood typically runs $1,800 to $3,200 installed, depending on the frame material and the access control. A single swing driveway gate with a new operator lands between $3,200 and $5,500. A sliding gate, especially one on an apartment complex or a narrow side driveway, runs $4,500 to $7,500 with a heavy-duty track, rack, and safety sensors. Double gate installs are priced per leaf, and most complete jobs we quote in North Hollywood fall between $5,500 and $9,000. The written estimate you receive before any work starts breaks out the line items: post footings, gate fabrication or assembly, operator, safety sensors, access control, and site cleanup. The price we hand you is the price on the invoice. We don’t open the job with a low verbal estimate and close it with a change order. Call (805) 210-8672 for a free walkthrough and a written scope on any of these installs.
We Also Serve Cities Near North Hollywood
Our crews cover North Hollywood and the surrounding Valley neighborhoods, including Studio City, Van Nuys, Sherman Oaks, and Beverly Hills. If your property is on the edge of North Hollywood near the Studio City line or up near the Sherman Oaks border, the same written-price and photo-documentation standard applies. Call us and we’ll confirm the scheduling window.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Hollywood
Because the post, not the panel, was the weak point from the start. North Hollywood’s 1940s to 1960s driveways and block walls were never built for a 400-pound gate leaf. When a gate was retrofitted onto an existing driveway, the installer often set the hinge post into whatever concrete was already there, sometimes just a few inches deep. That post leans over time, the leaf binds, and the operator burns out trying to move it. The panel was never the problem. On a new install here, we have to account for the existing substrate before we commit to a post spec. Call (805) 210-8672 and we’ll check what’s actually under your driveway edge before quoting you a number.
Yes. Any new automated gate operator installed in North Hollywood must include entrapment protection, which means photo-eye sensors and edge sensors where required. A gate built in the early 1990s predates the current California safety standard, so the operator replacement becomes a compliance correction in practice. We write the sensor addition into the scope and photograph the final alignment. It isn’t optional on a new install, and a contractor who skips it is leaving you a liability. Call (805) 210-8672 for a written scope that includes the required safety devices.
Usually yes, but it will likely be a sliding gate rather than a swing gate. A swing leaf needs clearance to arc open, and four feet of side clearance isn’t enough for most vehicle-width gates without hitting the wall or the car. A slide gate runs parallel to the wall and only needs the length of the opening plus a few feet of track. We’ll measure the actual footprint and tell you which style fits without forcing a design that fights the space. This is the most common geometry we work with on North Hollywood’s narrow side yards. Call (805) 210-8672 for a measurement visit.
Yes, and we plan for it. Santa Ana winds carry fine abrasive dust off the dry hills and deposit it directly into exposed slide gate tracks. On a new install in North Hollywood, we specify sealed-bearing rollers and hardened steel track instead of the open nylon wheels that are standard elsewhere. We also set the track above grade where possible so debris doesn’t collect as fast. The hardware costs a little more up front and saves a track rebuild within a few seasons. If your existing track is already ground down, we’ll show you the wear in the photo log before we quote the replacement. Call (805) 210-8672 to set up a track inspection.
By setting independent footings for each hinge post, matching the operator pair, and setting the limit switch travel on each leaf separately. Sagging on a double gate almost always traces back to one post settling faster than the other, or to one operator pulling harder than its pair. We also add a center stop or catch plate where the two leaves meet, so neither leaf carries the other’s weight. The final settings get photographed and logged, so if the gate shifts a year later, we’re adjusting from a known reference instead of starting from scratch. Call (805) 210-8672 for a written scope on your double gate.
Contact Vance Gate Repair Canoga Park for Gate Installation in North Hollywood
We install driveway, pedestrian, sliding, swing, and double gates across North Hollywood, and we price every job in writing before the first tool comes off the truck. Our crews understand Valley heat, Santa Ana dust, retrofit posts, and shared driveways because those are the conditions we work in here every week. Call (805) 210-8672 for a free estimate and a written scope. A live person answers, any hour, and we’ll schedule a walkthrough at your property.
Written by Adrian Vance, Owner at Vance Gate Repair Canoga Park, serving North Hollywood gate installation and repair since 2014.
Gate Installation in Nearby Areas
